Kair Mini Single Room Heat Recovery Ventilator – Prevents Condensation & Recycles Heat

Kair Mini Single Room Heat Recovery Ventilator – Prevents Condensation & Recycles Heat

The Kair Mini Single Room Heat Recovery Ventilator (Model: KSRHRV100-WH) is a compact, wall-mounted ventilation solution designed to combat condensation, reduce humidity, and recover heat. Ideal for bathrooms, kitchens, bedrooms, or utility rooms, it extracts stale air and delivers fresh, filtered air while recycling heat through a high-efficiency ceramic regenerator. Easy to install and low-maintenance, this unit offers powerful performance in a discreet, energy-efficient design.

Product Features

Recovers up to 93% of heat from outgoing air

Operates in supply and extract modes with regeneration cycle

Built-in ceramic regenerator with high thermal efficiency

Intelligent automation via integrated humidity sensor and external control compatibility

Wall-mounted through 100mm core-drilled hole (min. 155mm wall depth)

Remote control and onboard control buttons included

Filter change indicator and maintenance alerts

Quiet and low-energy operation (down to 1.6W)

General Product Information

The Kair Mini SHR Ventilator is ideal for maintaining a healthy indoor environment in single rooms. Its compact cartridge design houses a fan and heat regenerator that alternately extract and supply air every 70 seconds, retaining heat and humidity to minimize energy loss. Units can be paired in master-slave networks for balanced airflow.

Energy Efficiency

Rated as a Class II appliance, the unit consumes between 1.6W to 5.5W (normal operation), with minimal thermal loss thanks to the ceramic regenerator. The auto damper further prevents backdrafts, and standby modes help conserve energy.

Health Dividend

Designed to reduce condensation, mould, and pollutants, the Kair Mini HRV promotes cleaner air and stable humidity. It’s particularly helpful for allergy and asthma sufferers, enhancing overall air quality without increasing heating bills.

How It Works

In regeneration mode, the ventilator operates in 2 cycles:

Cycle 1: Warm, stale air is extracted through a ceramic regenerator, which stores heat and moisture.

Cycle 2: Fresh air is drawn in and passed through the regenerator, recovering heat and humidity before entering the room.

This cycle repeats every 70 seconds. Paired units operate out of phase to ensure balanced extraction and supply.

Control

3 speeds: Low (I), Medium (II), High (III), plus Standby

Remote control and onboard buttons included

Regeneration Mode and Ventilation Mode selectable

Integrated humidity sensor triggers Boost mode

DIP switches allow setup of master/slave units, speed presets, direction, and boost delay timers

Night Mode (Speed I for 8 hrs) and Party Mode (Speed III for 4 hrs)

Installation Instructions

Wall-mounted through a 120mm core hole (min. wall depth 155mm)

Components include indoor cartridge unit, external ventilation hood, and air duct

Sound insulation layer and regenerator installed in the wall duct

Power via 100-240V AC mains with disconnecting device

Can be configured in networked master-slave setup (up to 15 slaves)

Product Specifications

Model: KSRHRV100-WH

Heat Recovery Efficiency: Up to 93%

Airflow: 10 to 29 m³/h (2.8 to 8.0 l/s)

Power Consumption: 1.6W (min) – 5.5W (max)

Noise Level: ≤30 dB(A)

Duct Hole Diameter: 120mm

Minimum Wall Thickness: 155mm

Ingress Protection: IP2X

Class: II

Filter Life: Up to 3 years

Product Maintenance

Filter replacement reminder every 90 days

Clean filters every 3 months (washable or vacuum)

Replace filter after 3 years

Regenerator should be vacuumed annually

Access through snap-off front panel

Electrical Safety

Must be installed by a qualified electrician. Connects to single-phase 100-240V, 50/60Hz mains supply. Requires isolation device with 3mm contact separation. Complies with LVD and EMC directives.

Regulations

Conforms to Building Regulations Part F (Ventilation)

EMC Directive 2014/30/EU

Low Voltage Directive 2014/35/EU

CE marked

RoHS and WEEE compliant

Performance

Speed I: 10 m³/h

Speed II: 22 m³/h

Speed III: 29 m³/h

Boost activates on humidity or external sensor signal

Reversing fan mode provides full regenerative cycle

Product Dimensions

Internal Unit Dimensions: 248 x 152 x 71 mm

Air Duct Diameter: 103 mm

Wall Hole: 120 mm core

Regenerator Length: 165 mm

Performance Specifications

Internal ceramic regenerator provides heat recovery up to 93%

Regeneration cycle: 70s extract / 70s supply

Optional DIP switch configuration for airflow direction and humidity threshold

External relay compatibility for smart sensors

WHY SPECIFY Kair™

Kair is a trusted UK manufacturer offering high-performance ventilation solutions backed by rigorous testing and user-focused design. The Kair Mini HRV is perfect for retrofits or new builds requiring discreet, energy-efficient, and compliant ventilation in individual rooms.

Available Accessories

Replacement Filter Kit (KSRHRV100-FLT)

External Weatherproof Hood (compatible with wall depth)

RS-485 Network Cabling Kit for paired units

Infrared Remote Control (included)